Frers 36 Variants

The Frers 36, originally known as the F3, was first built by Hinterhoeller. Later F3s were built with a two inch deeper keel that was thinner and 400 pounds light. The hull number cut in is not known. A tall rig was available.

The mold was then bought by Barry Carroll who produced the boat with the taller rig and deeper keel. This boat was originally called the F36. The deck mold was also new. Beginning with hull number 17, the keel and rudder were changed to an elliptical shape. 

F3

F36 (Frers 36)

F36-2 (Frers 36-2)

.